Choosing A Network From A List (Connect From List) - OM SYSTEM OM-1 Mark II Instruction Manual

Choosing a Network from a List (Connect from
List)
z
The camera will search for available networks and display them in a list from which you can choose the
network to which you wish to connect.
Menu
MENU
U e U
1.
Highlight [PC Connection] using the
[PC Connection] options will be displayed.
2.
Highlight [Connect from
A list of available networks will be displayed.
3.
Highlight the desired network using the
If the network is password-protected, you will be prompted to enter a password. Enter the
password and press the OK button.
Press the
I
an IP address and adjust other settings manually.
Press the
R
4.
If the camera is able to connect, the network will be displayed with a check (
network name.
Password-protected networks are indicated by a
If the camera has been paired with more than one computer, you will be prompted to choose
a computer before the network is displayed. Highlight the desired computer using the
buttons and press the OK button.
The camera can be used only with the selected computer. To select a different computer, you
must first terminate the current connection.
If the connection fails, the camera will display a message to
that effect, followed by the options shown in Step 3. Remove
and reinsert the memory card.
4. Wi-Fi/Bluetooth
U
List] using the
z
button to display [Detail Settings] for the highlighted network. You can enter
button to repeat the search and update the network list.
Wi-Fi Connection
buttons and press the OK button.
FG
buttons and press the OK button.
FG
buttons and press the OK button.
FG
icon.
2
447
Adjusting Wi-Fi Settings (Wi-Fi Connection)
) next to the
P
100 % 100 %
Connection failed
FG