Fn Lever Function] - OM SYSTEM OM-1 Mark II Instruction Manual

Configuring [
1.
Select [ Fn Lever Function] on the [Fn Lever Settings]
K
screen and press the OK button.
Off Changing the position of the Fn lever has no effect.
Switch the functions of the front and rear dials by changing the position of the
Fn lever. The functions for Positions 1 and 2 conform to the setting selected for
mode1
[
K
Switch between two groups of settings previously selected for [AF Mode], [AF
Target Mode], and [AF Target Point].
Press the INFO button and put a check (
recall with the Fn lever.
To remove the check, press the OK button again.
mode2
[AF Mode]: S-AF, C-AF, etc.
[AF Target Mode]:
[AF Target Point]: AF-target position
Toggle the shooting mode. You can switch to
mode3
the mode dial.
When [mode3] is selected, [
C
This function cannot be used in the following cases.
C
- [Fn Lever/Power Lever] (P.356)

Fn Lever Function]

K
Dial Function] (P.347).
Single,
X
Fn Lever Function] cannot be used (P.355).
n
) next to a setting that you want to
P
All, etc.
b
n
is set to [ON/OFF] or [OFF/ON].
353
Customizing the Fn Lever (Fn Lever Settings)
K
Fn Lever Function
Off
mode2
Switches AF mode/AF target mode/
AF target point according
to Fn lever position.
Target can be selected.
MENU INFO
Fn Lever Function screen
(movie) mode without rotating
mode1
mode3
OK