Pairing The Camera And Smartphone (Wi-Fi Connection) - OM SYSTEM OM-1 Mark II Instruction Manual

Pairing the Camera and Smartphone (Wi-Fi
Connection)
Follow the steps below when connecting the devices for the first time.
Adjust pairing settings using OM Image Share, not the settings app that is part of the smartphone
operating system.
1.
Launch the copy of the dedicated OM Image Share app previously installed on your
smartphone.
2.
Tap the icon displayed on the shooting standby screen.
J
You can also perform the following operations.
B
Super control panel
CA
Menu
MENU
3.
Select [Device Connection] and press the OK button.
4.
Follow the on-screen guide to adjust Wi-Fi/Bluetooth
The Bluetooth local name and passcode, the Wi-Fi SSID and password, and a QR code are
displayed in the monitor.
Scan the QR code, using
the OI.Share app.
Bluetooth Name
1
Bluetooth Passkey 000000
Wi-Fi SSID
2
Wi-Fi Password
5.
Tap the camera icon at the bottom of the OM Image Share display.
An [Easy Setup] tab will be displayed.
4. Wi-Fi/Bluetooth
U e U
Connection Setup
: xxxxxxxxxxx
:
: xxx-x-x-xxxxxxxx
: 0000000000000000
MENU
Wi-Fi Connection
U
®
settings.
Bluetooth local name
1
3/3
Bluetooth Passcode
Wi-Fi SSID
2
3
Wi-Fi Password
QR code
3
Pairing the Camera and Smartphone (Wi-Fi
426
Connection)