OM SYSTEM OM-1 Mark II Instruction Manual page 354

Configuring [
1.
Select [ Fn Lever Function] on the [Fn Lever Settings]
n
screen and press the OK button.
Off Changing the position of the Fn lever has no effect.
Switch the functions of the front and rear dials by changing the position of the
Fn lever. The functions for Positions 1 and 2 conform to the setting selected for
mode1
[
n
Switch between two groups of settings previously selected for [AF Mode], [AF
Target Mode], and [AF Target Point].
Press the INFO button and put a check (
recall with the Fn lever.
To remove the check, press the OK button again.
mode2
[AF Mode]: S-AF, C-AF, etc.
[AF Target Mode]:
[AF Target Point]: AF-target position
This function cannot be used in the following cases.
C
-
[mode3] is selected for
- [Fn Lever/Power Lever] (P.356)
Fn Lever Function]
n
Dial Function] (P.347).
Small,
o
[ Fn Lever Function]
K
) next to a setting that you want to
P
All, etc.
b
(P.352).
is set to [ON/OFF] or [OFF/ON].
354
Customizing the Fn Lever (Fn Lever Settings)
n
Fn Lever Function
Off mode1 mode2
Switches AF mode/AF target mode/
AF target point according
to Fn lever position.
Target can be selected.
MENU INFO
Fn Lever Function screen
OK