Enabling Af Target Selection Wrap ( Loop Settings) - OM SYSTEM OM-1 Mark II Instruction Manual

Enabling AF Target Selection Wrap (
Settings)
You can choose whether AF target selection "wraps around" the edges of the display. You can also
choose whether you have the option of selecting
around" to the opposite border of the display.
Menu
MENU AF
U U
[Off]: Wrap disabled. Target selection stays within the borders of the display.
[Loop 1]: If you continue to press the multi
selector in the same direction after reaching the
border of the display, the target in the same
row or column on the opposite border will be
selected.
Loop
Y
Selection
[Loop 2]: If you continue to press the multi
selector in the same direction after reaching the
border of the display, the target in the next
row or column on the opposite border will be
selected.
[No]: Target selection does not pass through
around.
[Yes]: If [Loop 1] or [Loop 2] is chosen for [
Via All will pass through
b
border.
Hiding
C
b
6. AF Target Settings & Operations
All (all targets) before wrapping around to the opposite
b
All (all targets) in
b
All] at [No].
All (all targets) before AF target selection "wraps
b
Loop Settings
U Y
All (all targets) before wrapping
b
Loop Selection], target selection
Y
[ AF Target Mode Settings] (P.109)
K
Enabling AF Target Selection Wrap (
141
Loop
Y
n
P A S M B
"Loop 1"
"Loop 2"
fixes [Via
Loop
Y
Settings)