Uploading Pictures As They Are Taken - OM SYSTEM OM-1 Mark II Instruction Manual

Hide thumbs Also See for OM-1 Mark II:
Table of Contents

Advertisement

Uploading Pictures as They Are Taken

Take pictures and upload them to a computer on the same network as the camera. You can take
pictures using the controls on the camera body or while controlling the camera remotely from
the computer. Before proceeding, connect the camera and computer as described in
Computer with the Camera (New Link)"
Wi-Fi connections may experience slow communication speeds or unintentional disconnections
C
from the computer or wireless device depending on the operated environment. We recommend
that you check the operation in your environment before shooting important pictures. If Wi-Fi
connection is interrupted, the data before upload will be discarded. Use the upload settings with
which the transferred data will be saved on the memory card in the camera before upload.
In order to connect to a computer, the shooting screen needs be displayed on the camera. After
C
connecting to the network, return to the shooting screen.
1.
Launch OM Capture on the destination computer.
If prompted to choose a connection type, click [Wi-Fi
Connection].
The computer will display the message, [Camera
connected] when the camera is detected.
The camera will display the message when a connection is
established.
2.
Configure OM Capture to automatically download pictures as they are taken.
Choose a destination for the downloaded pictures.
3.
Take pictures using camera or computer controls.
The pictures will be downloaded to the computer according to the options chosen.
See online help for more information on using the software.
B
(P.439).
449
"Pairing the
[Wi-Fi Connection]
1
PC
PC connection started
Camera is connected to PC.
Uploading Pictures as They Are Taken
1
OK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OM-1 Mark II and is the answer not in the manual?

Questions and answers

Mike
April 17, 2025

Pressing the 'U' button is not changing the view it stays on the super control panel

Subscribe to Our Youtube Channel

Table of Contents

Save PDF