Configuring Zebra Pattern Settings - OM SYSTEM OM-1 Mark II Instruction Manual

During movie recording, zebra patterns (stripes) will be displayed over the areas where
the luminance levels exceed the predetermined thresholds.
On A pattern will be displayed where the luminance level exceeds [
Y
A pattern will be displayed where the luminance level exceeds [
Z
pattern will be displayed where they overlap.
3.
The display returns to the Zebra Pattern Settings setting screen.

Configuring Zebra Pattern Settings

1.
Configure options.
Press
FG
display the setting menu.
After configuring options, press the OK button to return to
Zebra Pattern Settings setting screen.
Level 1
Y
Level 2
Z
to select an item and press the OK button to
A pattern will be displayed where the luminance level exceeds the specified
Y
value.
A pattern will be displayed where the luminance level exceeds the specified
Z
value.
Set this to [Off] if you want to display only one type of zebra pattern.
Displaying zebra patterns over high luminance
289
areas while recording movies (Zebra Pattern
Level 1].
Y
Level 2]. The
Z
Zebra Pattern Settings
Zebra Pattern Settings
Y
Level 1
Z
Level 2
MENU
Z
On
80
Off
OK
Settings)