Table of Contents
Advertisement
Shooting without the vibration caused by
shutter button operations (Anti-Shock
Settings)
Anti-shock shooting modes can be used to reduce the slight blur caused by shutter motion.
Use this option when even slight camera motion can cause blur, for example during macro or
telephoto photography.
Menu
MENU
U a U
[Off]: Anti-shock shooting modes ([
the drive mode selection screen. Normal shooting modes ([
displayed.
Anti-Shock
H
[On]: Anti-shock shooting modes ([
drive mode selection screen. Normal shooting modes ([
displayed.
Choose how long the camera waits to begin shooting after the shutter button is
Waiting
pressed all the way down when shooting in anti-shock shooting modes.
Time
[0sec], [1/8sec], [1/4sec], [1/2sec], [1sec], [2sec], [4sec], [8sec], [15sec], [30sec]
Be sure there is a check (
Settings]
(P.193).
Select a mode with
elapses, the shutter will be released and pictures will be taken.
7. Drive Mode
Anti-Shock
U
) next to a sequential shooting mode with
P
(P.190), press the OK button, then take pictures. After the specified time
t
Settings
H
], [
], etc.) are not displayed on
E
F
], [
], etc.) are displayed on the
E
F
Shooting without the vibration caused by shutter
197
button operations (Anti-Shock
H
P A S M B
], [
], etc.) are
F
g
], [
], etc.) are not
F
g
in
[Sequential Shooting
t
H
n
Settings)
Advertisement
Table of Contents
Need help?
Do you have a question about the OM-1 Mark II and is the answer not in the manual?
Questions and answers
Pressing the 'U' button is not changing the view it stays on the super control panel