Charging The Battery Using The Usb-Ac Adapter - OM SYSTEM OM-1 Mark II Instruction Manual

Charging the battery using the USB-AC
adapter
The battery will not be fully charged at the time of purchase. Charge the battery before use.
C
1.
Check that the battery is in the camera, and connect the USB cable and USB-AC adapter.
When attaching the USB cable, use an optional cable protector and cable clip to prevent
damage to the connectors and disconnection.
(CP-2)" (P.486)
Refrain from using anything other than the USB cable (CB-USB13) supplied with the camera
C
or sold separately.
USB-AC adapter (supplied)
1
AC outlet
2
USB cable (supplied)
3
The battery charge lamp lights during
charging. Charging with the camera turned
off takes about 2 hours 30 minutes. The
lamp goes out as the batteries reach full
charge. Remove the USB cable from the
camera.
If a charging error occurs, the battery charge lamp will blink. Disconnect and reconnect the
C
USB cable.
1
2
2
2
1
3
"Cable Clip (CC-1) / Cable Protector
g
2
1
3
4
USB connector
4
Battery charge lamp
5
30

Charging the battery using the USB-AC adapter

1
5