2.
Adjust shutter speed while previewing the results in the display.
Adjust shutter speed using the rear dial.
The slowest shutter speed available varies with the ND filter
selected.
[ND2(1EV)]: 1/60 s
[ND4(2EV)]: 1/30 s
[ND8(3EV)]: 1/15 s
[ND16(4EV)]: 1/8 s
[ND32(5EV)]: 1/4 s
[ND64(6EV)]: 1/2 s
[ND128(7EV)]: 1 s
If [On] is selected for [LV Simulation], the effects of changes to shutter speed can be
previewed in the display.
The camera requires a length of time equivalent to the selected shutter speed to produce [LV
Simulation] results similar to the final image.
When the time equivalent to the selected shutter speed passes, the "LV" part of the icon on
the screen turns green.
When the icon is green, the display is similar to the final image.
Changing exposure compensation or shutter speed resets the [LV Simulation] display.
3.
Release the shutter.
To end live ND filter photography, select [Off] in the [Live ND Shooting] display.
[Frame Rate] will be [Normal] during live ND photography.
C
The upper limit for [
C
is selected for [
K
The following cannot be used:
C
-
Flash photography, HDR, High Res Shot, multiple exposure, keystone compensation, bracketing,
focus stacking, interval-timer photography,
correction, and live GND shooting.
When Live ND Shooting is enabled, [Drive] is set to [
C
timer 12s), [
2s] (Silent self-timer 2s) and [
q
Unlike physical ND filters, the live ND filter does not reduce the amount of light reaching the image
C
sensor, and consequently very bright subjects may be overexposed.
ISO] during live ND photography is ISO 800. This also applies when [Auto]
K
ISO].
flicker scan, flickerless photography, fisheye
K
] (Silent Single). [
A
C] (Silent custom self-timer) can be set.
q
Slowing the Shutter in Bright Light (Live ND
245
1023
1023
[ 1 : 02 : 03 ]
[ 1 : 02 : 03 ]
F F
1
1
1
L
100 %
100 %
ND8 - LV
-
S S
0 0
+
15
15
5.6
5.6
1/
1/
F
F
1
Shutter speed
1
12s] (Silent self-
q
60p
60p L - 8 L - 8
1
4K
S - AF
S - AF
3 3
0.0
0.0
ISO
ISO
200
200
Auto
Auto
Shooting)
Need help?
Do you have a question about the OM-1 Mark II and is the answer not in the manual?
Questions and answers
Pressing the 'U' button is not changing the view it stays on the super control panel