Table of Contents
Advertisement
Shooting without shutter sound (Silent
Settings)
In situations where the shutter sound is a problem, you can use the silent shooting modes to shoot
without making a sound. An electronic shutter is used to reduce the minuscule camera shake caused
by the motion of the mechanical shutter, much as is the case for anti-shock photography.
Menu
MENU
U a U
Waiting Time
Noise Reduction
o
AF Illuminator
Flash Mode
During High Res Shot shooting (P.239), [
C
mode even if they are set to [Not Allow].
When [High Res Shot] is set to [On
Be sure there is a check (
Settings]
(P.193).
Select a mode with
short while when the shutter is released. The shutter does not sound.
The desired results may not be achieved under flickering light sources such as fluorescent or LED
C
lamps or if the subject moves abruptly during shooting.
The fastest available shutter speed is 1/32000 s.
C
7. Drive Mode
Silent
U
Choose how long the camera waits to begin shooting after the shutter button is
pressed all the way down when shooting in silent shooting modes.
[0sec], [1/8sec], [1/4sec], [1/2sec], [1sec], [2sec], [4sec], [8sec], [15sec],
[30sec]
[Off]: Shoots normally.
[Auto]: Reduces image "noise" in long exposures during silent photography.
The sound of the shutter may be audible when noise reduction is active.
Choose whether to allow the
Choose whether to allow
Choose whether the flash works as specified.
u
) next to a sequential shooting mode with
P
(P.190), press the OK button, then take pictures. The monitor turns dark for a
s
Settings
I
[
] (P.403)
to sound as specified.
o
[AF Illuminator] (P.134)
], [AF Illuminator], and [Flash Mode] work in [Allow]
o
], however, [Flash Mode] is fixed at [
Shooting without shutter sound (Silent
198
I
P A S M
to work as specified.
Flash Off].
B
in
[Sequential Shooting
s
n
B
I
Settings)
Advertisement
Table of Contents
