Deleting Pairing - OM SYSTEM OM-1 Mark II Instruction Manual

3.
When a message indicating pairing is complete is displayed,
press the OK button.
The data transfer indicator goes out when pairing is complete.
[Bluetooth] (P.428)
If you rotate the mode dial of the remote control or press the MENU button of the camera
C
before the pairing completion message is displayed, the pairing process ends. Paired device
information will be reset. Pair the devices again.
If you rotate the mode dial of a remote control that is not currently paired to CONNECT and
C
keep it 3 seconds, or when pairing fails, the pairing information from previous connections
will be reset. Pair the devices again.

Deleting pairing

1.
Select [Delete Pairing] and press the OK button.
2.
Select [Yes] and press the OK button.
When you have paired the camera with a remote control, you have to perform [Delete Pairing] to
C
reset pairing information before you pair the camera with a new remote control.
will automatically be set to [On
456
Wireless Shutter Setting
Pairing is complete.
Bluetooth setting is changed to On
AA:BB:CC:DD:EE:FF
] when pairing is complete.
L
L
.
OK
Connection