Table of Contents
Advertisement
1.
Remove the hot shoe cover and attach the flash.
Slide the flash in until the foot clicks into place at the back
of the shoe.
2.
Position the flash head for bounce-flash photography or direct
lighting.
The flash head can be rotated up and left or right.
Note that flash output may be insufficient for correct exposure when bounce flash lighting is
C
used.
3.
Rotate the flash ON/OFF lever to the ON position.
Rotate the lever to the OFF position when the flash is not in use.
177
1
Hot shoe cover
1
ON/OFF lever
1
Using a flash (Flash photography)
1
Advertisement
Table of Contents
Need help?
Do you have a question about the OM-1 Mark II and is the answer not in the manual?
Questions and answers
Pressing the 'U' button is not changing the view it stays on the super control panel