Connecting The Camera For High-Speed Raw Processing ( Raw/Control) - OM SYSTEM OM-1 Mark II Instruction Manual

Hide thumbs Also See for OM-1 Mark II:
Table of Contents

Advertisement

Connecting the Camera for High-Speed RAW
Processing (
When you edit RAW data with the camera and computer connected, processing will be faster than
when done with the computer only.
1.
After confirming that the camera is off, connect it to the computer using the USB cable.
2.
Turn the camera on.
The camera will display a message prompting you to identify the device to which the USB
cable is connected.
If the message is not displayed, select [Select] for
If the batteries are very low, the camera will not display a message when connecting to a
computer. Be sure the batteries are charged.
3.
Highlight [
0
press the OK button.
4.
Launch the copy of OM Workspace installed on the computer.
5.
Choose the picture to be processed.
Only the pictures that were taken using the following cameras.
OM-1 Mark II/OM-1 (as of January 2024)
You can not choose pictures on the SD card in the connected camera.
6.
Process RAW images.
Adjustments can be made to the shooting settings available on the camera and RAW
pictures processed accordingly.
The processed copies will be saved in JPEG format.
USB RAW data editing is not available when two or more cameras are connected.
See online help for more information on using the software.
RAW/Control)
0
RAW/Control] using the
[USB Mode]
buttons and
FG
Connecting the Camera for High-Speed RAW
464
(P.405).
USB
Storage
MTP
Webcam
0RAW/Control
USB PD
Exit
Processing (
RAW/Control)
0
OK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OM-1 Mark II and is the answer not in the manual?

Questions and answers

Mike
April 17, 2025

Pressing the 'U' button is not changing the view it stays on the super control panel

Table of Contents

Save PDF