Choosing A Flash Mode (Flash Mode); Flash Modes - OM SYSTEM OM-1 Mark II Instruction Manual

Choosing a Flash Mode (Flash Mode)

Button
Button
gYA UFGl
Super control panel
OK Flash Mode
U

Flash Modes

Flash modes that are displayed vary depending on the configuration of
Fill In
A
Flash Off
B
Slow
Slow
A
Manual
Manual
A
Enable the flash.
Shutter speed can be set to values between that selected for
C
Slow Limit] (P.187)
Disable the flash.
The flash will not fire even if the unit is on.
C
Slow shutter speeds are used to capture both the main subject and the
background.
Shutter speed is set according to the exposure value metered by
C
the camera and is not restricted by the option selected for [
Limit].
The flash fires at the selected level.
Appears only when the FL-LM3 is attached.
179
[Flash Mode Settings]
and [ X-Sync.] (P.186).
A
Choosing a Flash Mode (Flash Mode)
n
P A S M B
(P.183).
[
A
Slow
A