Table of Contents
Advertisement
Charging the Battery using a USB Device
The battery inserted in the camera will charge when the camera is connected via a USB cable to a USB
PD-compliant USB device.
Charging via USB
1.
Confirm that the ON/OFF lever is in the OFF position.
2.
Connect the camera to the USB device using a USB cable.
When attaching the USB cable, use an optional cable protector and cable clip to prevent
damage to the connectors and disconnection.
(CP-2)" (P.486)
The battery charge lamp lights during charging. Charging
times vary with the output of the USB device. The lamp
goes out as the batteries reach full charge.
If a charging error occurs, the battery charge lamp will blink. Disconnect and reconnect the USB
C
cable.
The supply of power ends when the battery is charged. Disconnect and reconnect the USB cable to
B
resume charging.
The camera can be powered using mobile batteries or similar devices connected via USB. For details,
B
see
"Powering the Camera via USB (USB PD)"
"Cable Clip (CC-1) / Cable Protector
g
(P.468).
32
Charging the Battery using a USB Device
Advertisement
Table of Contents
Need help?
Do you have a question about the OM-1 Mark II and is the answer not in the manual?
Questions and answers
Pressing the 'U' button is not changing the view it stays on the super control panel