Configuring [Af Limiter] - OM SYSTEM OM-1 Mark II Instruction Manual

3.
Return to the
AF Limiter is not available in the following cases.
C
- When the focus limiter is enabled on the lens
- When using focus bracketing or focus stacking
- While in the movie mode or recording a movie
-
When [ AF] or [
R

Configuring [AF Limiter]

1.
Configure options.
Press
FG
display the setting menu.
Press the OK button again to return to the
setting screen.
Distance for
On1
Distance for
On2
Distance for
On3
Release
Priority
The figures displayed in [Distance for On1] – [Distance for On3] are intended as guides
C
only.
AF Limiter setting screen.
K
AF ] is selected for focus mode
R
J
to select an item and press the OK button to
Set the range of focusing distances to be used when [On1] is selected.
Change the number with
[000.0] – [999.9m/ft]
Set the range of focusing distances to be used when [On2] is selected.
Change the number with
[000.0] – [999.9m/ft]
Set the range of focusing distances to be used when [On3] is selected.
Change the number with
[000.0] – [999.9m/ft]
[Off]: Complies to the
[On]: The shutter can still be released if the camera is unable to focus when
a setting other than [Off] is selected for [AF Limiter].
AF Limiter
K
. Use to move between digits.
FG HI
. Use to move between digits.
FG HI
. Use to move between digits.
FG HI
[Release Priority] (P.118)
130
K
AF Limiter
AF Limiter
Distance for On1
Distance for On2
Distance for On3
Release Priority
MENU
setting.
Lens Focus Range (
K
On1
5.0~999.9m
10.0~999.9m
50.0~999.9m
On
OK
AF Limiter)