Setting The Card To Record To ( K Card Slot Settings / N Card Slot Settings); Configuring; Card Slot Settings] - OM SYSTEM OM-1 Mark II Instruction Manual

Setting the card to record to (
Settings /
When there are cards in both slots 1 and 2, you can select which card to record still images and movies
to.
Super control panel
OK Save Settings
U K
Menu
MENU
U e U
MENU
U e U

Configuring [

Choose the recording method for still images (P.389).
Save
K
[Standard] / [Auto Switch] / [Dual Independent
Settings
[Dual Same
Choose the card used to record photographs. This option takes effect when
[Standard] or [Auto Switch] is selected for [
Save
K
Slot [Slot 1]: Photographs are recorded on the card in slot 1.
[Slot 2]: Photographs are recorded on the card in slot 2.
Choose the card used for still image playback when [
[Dual Independent
].
6
Slot
q
[Slot 1]: Photographs on the card in slot 1 are played back.
[Slot 2]: Photographs on the card in slot 2 are played back.
You can also choose a card for playback using the
B
front or rear dial to switch cards while playback is in progress. This does not change the option
selected for [ Slot].
q
Card Slot Settings)
n
1. Card/Folder/File
U K
1. Card/Folder/File
U n

Card Slot Settings]

K
] / [Dual Same
5
], [Dual Independent
5
K
Card Slot Settings
Card Slot Settings
5
]
6
Save Settings].
K
K
], [Dual Same
6
button. Hold the
q
Setting the card to record to (
388
Card Slot
P A S M B
] / [Dual Independent
Save Settings] is set to
], or [Dual Same
5
button and rotate the
q
Settings / Card Slot Settings)
n
n
] /
6
Card Slot
K