3.
Release the shutter.
You can choose the functions performed by the front and rear dials.
B
Front and Rear Dials (
You can use the Fn lever to reverse the roles of the front and rear dials. The Fn lever can also be
B
assigned other roles.
You can choose whether the display reflects the effects of exposure compensation or maintains
B
a constant brightness for ease of viewing.
(P.362)
To achieve the effect of a slow shutter in brightly-lit settings in which slow shutter speeds are
B
not otherwise available, use the live ND filter.
Shooting)" (P.243)
Depending on the shutter speed selected, you may notice banding in the display caused by flicker
B
from fluorescent or LED light sources. The camera can be configured to reduce the effects of flicker
during live view or when pictures are taken.
Shooting)"
(P.203),
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure, the aperture display will flash as shown.
Display
Low aperture value
2000 F2.8
High aperture value
125 F22
When [
ISO] is not set to [Auto], optimal exposure may be achieved by changing the setting.
K
B
"Changing ISO sensitivity (ISO)" (P.166)
g
The aperture value shown when the display flashes varies with the lens and focal length.
B
Dial Function /
K
"Customizing the Fn Lever (Fn Lever Settings)" (P.352)
g
"Reducing Flicker Under LED Lighting (
Underexposure.
Choose a slower shutter speed.
Overexposure.
Choose a faster shutter speed. Shutter speeds as fast as 1/32000 s are
available in silent mode.
If the subject is still overexposed at the higher speed, the limits of the
camera metering system have been exceeded. Use a third-party ND
(Neutral Density) filter to reduce the amount of light entering the camera.
Dial Function)" (P.347)
n
"Changing the look of the display (
g
"Slowing the Shutter in Bright Light (Live ND
g
"Reducing Flicker in Photographs (Anti-Flicker
g
Flicker Scan /
K
Problem/solution
64
Choosing shutter speed (
"Assigning Roles to the
g
LV Mode)"
K
Flicker Scan)" (P.157)
n
S
: Shutter-Priority AE)
Need help?
Do you have a question about the OM-1 Mark II and is the answer not in the manual?
Questions and answers
Pressing the 'U' button is not changing the view it stays on the super control panel