OM SYSTEM OM-1 Mark II Instruction Manual page 340

Role
Live GND Shooting
(GND)
( only)
K
Off
Flash Mode ( )
A
( only)
K
/
g Y
(sequential shooting/
self-timer)
( only)
K
Lock
7
(touch control lock)
Electronic Zoom
( )
X
AF Stop (AF Stop)
Enable the live GND filter (P.246). Press once to enable [Live GND
Shooting] and adjust filter position and boundary settings. Press the
control again to display shooting information and access other settings.
Hold the button and rotate the front or rear dial to adjust [Filter Type]
and [GND Number]. Press and hold the control to select [Off] for [Live
GND Shooting].
The control is not used.
Adjust flash settings (P.179). Press once to display flash options and again
select the highlighted option and exit. Highlight settings using the front or
rear dial or .
HI
This function can be assigned to the
C
first set [ ] to [Direct Function].
d
Choose a drive (sequential shooting/self-timer) mode (P.190). Press the
button to display drive mode options and then choose a mode using the
front or rear dial or the
This function can be assigned to the
C
first set [ ] to [Direct Function].
d
Lock touch controls. Press and hold the button once to lock touch controls
and again to unlock.
This function can be assigned to the
C
first set [ ] to [Direct Function].
d
Zoom power zoom lenses in or out. After pressing the control, use the
arrow pad to zoom in or out. Use
zoom out.
This function can be assigned to the
C
first set [ ] to [Direct Function].
d
Suspend autofocus. Focus locks and autofocus is suspended while the
control is pressed. Applies only to the lens
Function
and
I
buttons.
HI
and
I
and
I
or
F I
and
I
j
340
Changing the roles of buttons (Button Settings)
buttons only. You must
G
buttons only. You must
G
buttons only. You must
G
to zoom in and or
G
buttons only. You must
G
button.
to
H