Displaying Camera Motion On The Monitor (Handheld Assist) - OM SYSTEM OM-1 Mark II Instruction Manual

Displaying camera motion on the monitor
(Handheld Assist)
You can configure the camera to display the motion of the camera
and the boundaries of motions that can be corrected by the image
stabilizer when the shutter button is pressed halfway and during
exposure. This is useful when you want to reduce camera motion
during long exposure with the camera held by hand.
Menu
MENU
U a U
Off Camera motion is not displayed on the monitor.
Camera motion is displayed on the monitor when the shutter button is pressed halfway and
On
during exposure.
There is no guarantee that the picture will be without blurs, even if the camera motion indicator
C
stays within the gray frame.
Camera motion cannot be displayed correctly when the camera is close to the subject.
C
Camera motion is not displayed if [
C
party lenses, with which only the lens image stabilizer operates.
If [ Image Stabilizer] is set to [Off], camera motion is only displayed during exposure.
6
C
8. Image Stabilizer
U
Image Stabilizer] is set to [Off] or if you are using third-
K
Handheld Assist
Displaying camera motion on the monitor
209
P A S M B
1023 1023 [ 1 : 02 : 03 ] [ 1 : 02 : 03 ]
1 1 1 L
100 % 100 %
-
P P 0 0 +
250 250 5.6 5.6
1/ 1/ F F
1 2
The boundaries of motions
1
that can be corrected by the
image stabilizer (gray)
Camera motion (horizontal/
2
vertical)
Camera motion (roll)
3
(Handheld Assist)
n
60p L - 8 L - 8
F F 60p
1 4K
S - AF S - AF
3 3
ISO ISO
0.0 0.0 200 200
Auto Auto
3