If You Already Have Tektronix Printers Installed - Tektronix Phaser 220e Reference Manual

3
Printing From a PC

If you already have Tektronix printers installed

3-2
Phaser 220 Drivers and Utilities
If you have any Tektronix printers installed with an earlier version of the
Tektronix Windows driver, you can remove the old Þles you no longer need.
Then, use the latest Tektronix Windows driver to reinstall all your Tektronix
printers with the latest driver software. There are two ways to remove the
old Þles: either with the installer program on older versions of the Tektronix
Windows driver, or by deleting speciÞc Þles. Also, there are instructions for
removing the Þles for the TekColor PS Previewer.
Automatically deinstalling printers
If you still have an earlier version of the Tektronix Windows driver, you can
use the INSTALL.EXE program on that diskette to remove the older
driver software.
1.
Start Windows.
2.
Insert your older Tektronix Windows driver diskette into your
computerÕs disk drive, for example, drive B.
3. Click File.
4. Click Run.
5.
Type the following command:
B:INSTALL
The Install Tektronix¨ Printers dialog box appears.
6. Select All Tektronix Printers, and choose the Deinstall button.
7. When the program Þnishes removing the old Þles, choose the Exit
button, and eject the diskette.
8.
If you have the TekColor PS Previewer still installed, refer to the
topic ÒRemoving the TekColor PS Previewer softwareÓ in this
chapter, to delete the Þles.
9. When you are Þnished removing the old driver Þles,
restart Windows.
10. Go on to the topic ÒInstalling the Tektronix driverÓ in this chapter,
to install all of your Tektronix printers with the latest
driver software.