Selecting The Printer In The Chooser; Using The Tektronix Driver - Tektronix Phaser 220e Reference Manual

Selecting the printer in the Chooser

Using the Tektronix driver

Note
After changing printer drivers, always check Page Setup in all
open applications.
1. Select Chooser from the Apple menu.
2. Click the Phaser 220 printer driver icon located on the left-hand
side of the Chooser. A list appears with the printers you have
connected to your Macintosh or printers that are available on a
network. (If the printer driver icon does not appear, Restart your
Macintosh, and repeat the printer driver installation procedure;
also check the cable connections on your computer and printer.)
3. Click on the Tektronix printer you want to print to. The list of
Tektronix printers is located on the right side of the Chooser.
4.
Close the Chooser by clicking its close box.
Note If you change printer drivers in the Chooser, always check for the
appropriate paper selection in Page Setup. Different drivers
have different page sizes listed in the pull-down menu.
Use the Page Setup, Print, and TekColor Options dialog boxes to select
printing options. Refer to other chapters in this printing reference for
instructions on performing common tasks with the driver.
Applications that use their own drivers
Some Macintosh applications, such as Aldus PageMaker, use their own
printer drivers. The best way to obtain the TekColor color corrections on
your prints is to use the Phaser 220 printer driver. For example, you can
force PageMaker to use the Tektronix driver by holding down the Option
key and choosing Print from the File menu. For other applications, refer to
the softwareÕs documentation for the correct procedure.
Printing From a Macintosh
Printing Reference
2
2-3