Hpgltest.plt (Test Hp-Gl Mode); Pstest.ps (Test Postscript Mode); Reset.ps (Resetting The Printer) - Tektronix Phaser 220e Reference Manual

HPGLTEST.PLT (test HP-GL mode)

PSTEST.PS (test PostScript mode)

RESET.PS (resetting the printer)

The HPGLTEST.PLT Þle is an HP-GL Þle that prints a single line of text if the
printer is operating in HP-GL mode. Send this Þle to the printer (with the
DOS COPY command) after you send PS2HPGL.PS to make sure that the
change was made correctly.
The contents of HPGLTEST.PLT is shown here:
;IN;PC 0,0,0,0.35,1;SP 1;PU6000,7000;RO90;PD;
LBThe Phaser is in HP-GL mode.;AF;
The PSTEST.PS Þle is a PostScript Þle that prints a single line of text if the
printer is operating in PostScript mode.
The contents of PSTEST.PS is shown here:
%!
CTRL-D
initclip clippath pathbbox newpath 20 sub 3 index
exch 10 add moveto
/Helvetica findfont 14 scalefont setfont
(The Phaser is in PostScript mode.) show showpage
CTRL-D
%!
systemdict/languagelevel known{languagelevel 2
eq{true (0) startjob dup not
{/exitserver errordict/invalidaccess get
exec}if}{false}ifelse}{false}ifelse
{ systemdict begin quit } if
Printing from a Workstation
Printing Reference
4
4-11