Tektronix Phaser 220e Reference Manual page 65

Adding Control-D characters to utility files
1.
Locate the addctrld UNIX shell script in the PHSR220 directory on
the Printer Utilities diskette for PC/DOS. You must copy this Þle
to your workstation before you can use it. (Or, obtain this shell
script through one of the methods described in the topic
ÒObtaining the utility Þles,Ó in this chapter.)
2. To add Control-D characters to the beginning and end of a Þle,
type the following command:
addctrld Þlename1.ps Þlename2.ps
where Þlename1.ps is the utility Þle you want to add Control-D
characters to, and Þlename2.ps is the revised Þle with a new name.
(Both Þlename1.ps and Þlename2.ps can have the same name, but the
original Þle will be overwritten by the revision.)
3. Send the utility Þle to the printer in the usual manner.
Printing from a Workstation
Printing Reference
4
4-3