If Printed Colors Are Not What You Expected - Tektronix Phaser 220e Reference Manual

10
Troubleshooting

If printed colors are not what you expected

10-10
Phaser 220 Drivers and Utilities
If printed colors are not what you expected, try the following suggestions:
Select another Color Correction option in the driver and print
your image again. Refer to Chapter 6, ÒSelecting Color
CorrectionsÓ for more information.
If you are not using a Tektronix driver and are sharing the printer
with other users on a network, another user may have changed the
printer's standard color adjustment defaults. Refer to the topic
ÒSharing the printer on a networkÓ in this chapter for more
information.
If you use the driver's Use Printer's Settings option and printed
colors are not what you expected, check the Color Correction
switches on the printer's rear panel. Switches 8 and 9 on the
Phaser 220i (Vivid Blue and Simulate Press) or Switch 3 on the
Phaser 220e, change the printer's default color correction. Refer to
the topic ÒSharing the printer on a networkÓ in this chapter for
details on how these switches affect prints made from the driver.
If you have questions about PANTONE Color Matching, refer to
the HAL article on PANTONE. To call HAL, refer to the topic
ÒUsing the automated fax system,Ó in this chapter.
If you have questions about images printing in black-and-white
only, refer to the HAL article on that subject. To call HAL, refer to
the topic ÒUsing the automated fax system,Ó in this chapter.