Tektronix Phaser 220e Reference Manual page 137

PC and workstation users
Use the STARTPG.PS Þle to enable printing of the printer's startup page.
Use the NOSTRTPG.PS Þle to stop the printer from printing a startup page.
1. Locate the startup page Þles in the PHSR220 directory on the
Printer Utilities diskette.
2.
Copy the Þles to your hard disk, or use the Þles from the diskette.
3. PC users: Use the DOS COPY command to send a Þle to the
printer. For example, if you want to send the Þle to the parallel
port, type the following at the DOS prompt:
COPY Þlename LPT1:
(or COM1: if you want to send the Þle to the serial port).
Workstation users: ConÞgure the printer port to receive
PostScript, then send a Þle to the printer.
Modifying Printer Operation
Printing Reference
8
8-5