PC users
1.
Locate the PRNTCNFG.PS Þle in the PHSR220 directory on the
Printer Utilities diskette.
2.
Copy the Þle to your hard disk, or use the Þle from the diskette.
3.
PC users: Use the DOS COPY command to send a Þle to
the printer.
For example, to send the Þle to the parallel port, type:
COPY Þlename LPT1:
(or COM1: if you want to send the Þle to the serial port).
Workstation users: ConÞgure the printer port to receive
PostScript, then send a Þle to the printer.
Modifying Printer Operation
Printing Reference
8
8-7