Tektronix Phaser 220e Reference Manual page 24

2
Printing From a Macintosh
2-2
Phaser 220 Drivers and Utilities
1.
Make sure that your Macintosh is powered up with system
software version 6.0.7, or 7.0 or higher, installed.
2. Close all applications and disable virus protection software. Some
virus protection software (such as Gatekeeper) may interfere with
driver installation. Refer to the programÕs documentation
for instructions.
3. Insert the Macintosh Printer Driver diskette into the disk drive.
When the diskette appears on the desktop, you'll see several icons.
4. Double-click on the Installer icon to start the Installer program.
Read the introduction screen, then click OK. You'll see Easy
Install in the Installer window with the software listed.
(illustration)
5. Click the Install button. All the necessary printer software is
automatically installed onto your hard disk.
6.
Click the Quit button in the dialog box that appears.
7. Store the printer driver diskette in a safe place.