Using A Utility File - Tektronix Phaser 220e Reference Manual

Using a utility Þle
Macintosh file PC file name
name
Use Upper Tray UPPRTRAY.PS
Use Lower Tray LOWRTRAY.PS
Use Either Tray ANYTRAY.PS
Macintosh users
1.
The Use Upper Tray, Use Lower Tray, and Use Either Tray Þles are
compressed into the Phaser 220 Utilities.sea archive Þle on the
Macintosh Printer Utilities diskette, and must be decompressed
before you can use them. To decompress these Þles, follow the
steps listed under the topic ÒDecompressing the Macintosh utility
ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After decompressing
these Þles, continue with the steps listed below.
2.
Select the appropriate printer in the Chooser.
3. Locate the Use Upper Tray, Use Lower Tray, and Use Either Tray Þles
in the folder on your hard disk containing decompressed
utility Þles.
4. Double-click on each Þle's self-sending arrow icon. Click OK in
the dialog box to send each Þle to the printer.
Selecting Media and Image Options
Notes
When sent to the printer, these Þles
have the following features:
With Use Upper Tray
(UPPRTRAY.PS) and Use Lower
Tray (LOWRTRAY.PS) the printer
chooses only the tray selected with
the Þle, and the printer will not
automatically switch to the other tray
when the selected tray is empty.
With Use Either Tray (ANYTRAY.PS)
the printer automatically switches to
the upper tray when the lower tray is
empty, if both trays contain the same
media.
File settings are overridden by the
driver setting for prints made from
the driver.
File settings persist across print jobs
and across printer power cycles.
Printing Reference
5
5-5