Tektronix Phaser 220e Reference Manual page 167

If PANTONE Colors are not printing as expected, make sure you
are printing without any color corrections as outlined below. Also,
refer to the topic ÒPrinting the PANTONE Color chartÓ in Chapter
6, ÒSelecting Color Corrections,Ó for more information.
From the Tektronix Macintosh driver, select the None option in the
TekColor Options dialog box
From the Tektronix Windows driver, select the None option in the
Tektronix Printer Features dialog box.
If you are not using a Tektronix driver, do one of the following to
turn off all color corrections:
Using switches only
On the Phaser 220i, place both Switch 8 and Switch 9 in the down
position.
On the Phaser 220e, place Switch 3 in the down position.
Using switches and a downloadable utility Þle:
On the Phaser 220i, place both Switch 8 and Switch 9 in the up
position and download the No Color Correction (NOCORECT.PS)
utility Þle to the printer.
On the Phaser 220e, place Switch 3 in the up position and download
the No Color Correction (NOCORECT.PS) utility Þle to the printer.
Troubleshooting
Printing Reference
10
10-11