Tektronix Phaser 220e Reference Manual page 171

10
Troubleshooting
For those not using a Tektronix driver: If you send the Use Either
Tray (ANYTRAY.PS) Þle to the printer, then, when one tray runs
out of media, the printer automatically switches to the other tray
only if it contains the same media type as the Þrst tray. If there are
two different media types in the two trays, the printer will not
automatically switch.
When two paper trays are installed in the printer and the selected
tray runs out of media during a multi-page job, the printer does
not continue printing from the other tray.
Also, refer to the Phaser 220 User Manual for more information.
10-15
Printing Reference