Tektronix Phaser 220e Reference Manual page 92

6
Selecting Color Corrections
If your Phaser 220 printer is shared by other users on a network
Another user may use the utility Þles or printer switches to change the
printerÕs default color correction setting. If this situation occurs, the prints
you make through a non-Tektronix driver may not print as expected. Refer
to the topic ÒSharing the printer on a networkÓ in Chapter 10,
ÒTroubleshooting,Ó for details on how the color correction utility Þles
interact with the driver settings for either Tektronix or non-Tektronix
drivers.
Application color corrections
Some applications perform color corrections to improve screen-to-printer
color matching. The color correction options in the Tektronix drivers adjust
colors in the printer after the application has performed its color corrections.
If the application uses CIE (Commission Internationale de lÕEclairage) colors,
the Tektronix corrections will not be applied. If you select a color correction
option in the driver other than None, the selection may override some
application features. If you try one of the driverÕs other options and the
printed results are not what you expected, then select the None option and
try reprinting your image with the new setting.
If you are using a non-Tektronix driver
To use the color corrections with a non-Tektronix driver, refer to the topics
ÒUsing the utility Þles and switchesÓ and ÒUsing the switches on the
printerÕs rear panelÓ in this chapter, for instructions.
6-6
Phaser 220 Drivers and Utilities