Tektronix Phaser 220e Reference Manual page 47

6.
Set the Timeouts. These options regulate your computerÕs
communications with its printer ports.
Device Not Selected: Type a value of 0, or between 15 and 999, in
this text box to change the number of seconds Windows waits
before notifying you that a printer is off-line. The default is
15 seconds.
Transmission Retry: You can change the number of seconds
Windows waits after a print job has begun sending characters to the
printer before sending an Alert message that the printer is no longer
accepting data. Type a value between 45 and 999 in this text box
(the default setting is 45 seconds). When using the Print Manager
with a shared printer, you should set this option to a larger value,
such as 600 (10 minutes) to avoid the alert message when printing
multiple page documents, or 999 to avoid unnecessary timeouts
during multiple page jobs.
7. Choose the OK button to return to the Printers dialog box, then
choose the Setup button. A dialog box appears with the name of
the printer you selected across the top. Use this dialog box to
select paper source, paper size, image orientation, and the number
to print.
8.
Choose the Options button to see the Options dialog box. Make
sure that the Color box is checked to print in color.
9. From the Options dialog box, choose the Advanced button to see
the Advanced Options dialog box. Make sure that the Use
PostScript Level 2 Features check box is checked on.
This option affects the print time of bitmapped (raster) images by
improving the image transfer time from the computer to the
printer, and by improving the image processing time in the
printer. This option is only available to applications that use this
Tektronix driver with Tektronix PostScript Level 2 printers, such
as the Phaser 220. When this box is checked, the Compress
Bitmaps option is unavailable (grayed out). Choose the OK
button to return to the Options dialog box.
Printing From a PC
Printing Reference
3
3-9