1
Before You Begin
1-8
Phaser 220 Drivers and Utilities
Using the utility files
The utility Þles change the way the printer operates. First, decompress the
archive Þle from the diskette to a folder on your hard disk. Install the
Tektronix driver (or a LaserWriter driver) and select the appropriate printer
in the Chooser, then send the Þles to the printer. There are two ways to send
Þles to the printer:
Self-sending Þles: If the Þle has a self-sender arrow icon, the Þle is
automatically sent to the currently chosen printer when you
double-click on the icon.
(illustration)
LaserWriter Utility: If the Þle does not have the self-sending icon,
use the LaserWriter Utility to send the Þle to the printer.
(illustration)
Using self-sending files
Certain Macintosh Þles, designated by a self-sender arrow icon, are
automatically sent to the currently selected printer when you double-click
on the icon. Most of the Þles in the Phaser 220 Samplers.sea and Phaser 220
Utilities.sea archive Þles are self-sending.
After double-clicking on the self-sender icon, a dialog box appears with the
name and a short description of the Þle you selected and the printer you are
sending the Þle to. Select Cancel or OK from this dialog box to continue.