Tektronix Phaser 220e Reference Manual page 31

11.
Select your printerÕs PPD Þle, for example, TKP220I1.PPD. Make
sure that the information under Printer Model matches the printer
you have and the PostScript Version information you got in
Step 9. Click Select.
Note
If the information under Printer Model is not an exact match, use
the closest printer name, and call Tektronix Customer Support in
the U.S. and Canada at 1-800-835-6100 for the latest PPD Þle.
Outside the U.S. and Canada, contact your local Tektronix
reseller. You can also download the latest PPD Þles from the
Tektronix Bulletin Board Service (BBS) at (503) 685-4504.
12. Click ConÞgure. In the Þeld for Memory ConÞguration under
Installable Options, select the amount of memory your printer
has installed. Check other options either Installed or
Not Installed as appropriate.
13. Click OK in two dialog boxes and close the Chooser.
14. Open the Page Setup dialog box to see a pop-up menu with all of
the printerÕs supported paper sizes.
15.
Open the Print dialog box to select the paper source, either upper,
lower, or auto select.
16. In the Print dialog box, click the Options button to see the Print
Options dialog box. There are printer-speciÞc features,
MediaType and TekColor, listed at bottom of the dialog box.
Refer to Chapter 5, ÒSelecting Media and Image Options,Ó and
Chapter 6, ÒSelecting Color Corrections,Ó for details on
these options.
Note The LaserWriter 8.0 driverÕs standard 13 fonts include four fonts
each in the Times, Helvetica, and Courier typefaces, plus the
Symbol character set.
Printing From a Macintosh
Printing Reference
2
2-9