Simulate display colors
The Simulate Display option makes printed colors approximate the colors
on a standard display screen. This selection should improve the
screen-to-printer color accuracy for most applications that donÕt perform
their own color corrections. This selection is best for applications that deÞne
colors as RGB (red, green, blue), HLS (hue, lightness, saturation), or HSB
(hue, saturation, brightness).
Printing from a Macintosh
Choose one of the following methods to use the Simulate Display
color correction.
Macintosh driver: Select the Simulate Display option in the
TekColor Options dialog box.
Macintosh utility Þle:
Phaser 220i: Place both Switches 8 and 9 up and send the Simulate
Display utility Þle to the printer.
Phaser 220e: Place Switch 3 up and send the Simulate Display utility
Þle to the printer.
Printing from a PC
Choose one of the following methods to use the Simulate Display
color correction.
Windows driver: Select the Simulate Display option in the
Tektronix Printer Features dialog box.
PC utility Þle:
Phaser 220i: Place both Switches 8 and 9 up and send the
DISPLAY.PS utility Þle to the printer.
Phaser 220e: Place Switch 3 up and send the DISPLAY.PS utility Þle
to the printer.
Selecting Color Corrections
Printing Reference
6
6-13