3
Printing From a PC
Updating the standard Microsoft Windows PostScript driver
3-16
Phaser 220 Drivers and Utilities
If you prefer to use the standard Microsoft Windows PostScript printer
driver instead of the Tektronix Windows driver, follow these instructions.
This update procedure provides printer page size information for Windows
applications using the standard Microsoft driver. However, color corrections
and other PostScript Level 2 features are available only with the Tektronix
Windows 3.1 driver and are not supported by the standard Microsoft driver.
Refer to Chapter 6, ÒSelecting Color Corrections,Ó for information on color
correction alternatives, such as with utility Þles and printer switches.
These instructions assume a basic familiarity with Windows operation and
terminology. For additional information about Windows, refer to your
Microsoft Windows documentation.
1.
Insert the Tektronix Windows 3.1 Printer Driver diskette into your
computerÕs disk drive, for example, drive B:.
2.
Start Windows.
3.
Open the Control Panel. Double-click on the Printers icon; the
Printers dialog box appears.
4.
Choose the Add>> button; a list of printers is displayed.
5.
Select Install Unlisted or Updated Printer.
6.
Choose the Install button.