Printing From A Workstation; Printing Files; Using The Utility Files - Tektronix Phaser 220e Reference Manual

Chapter
4
Printing Þles
Using the utility Þles
Printing from a
Workstation
You can send Þles from your workstation to the Phaser 220 as you would to
any PostScript printer, for example, the Apple LaserWriter II NTX.
Workstation users can print from any application that generates PostScript
Level 1 or Level 2.
For more information on printing from a workstation, request a document
catalog from HAL, the Tektronix automated fax system. Call (503) 682-7450
(direct) or, in the U.S. and Canada, call 1-800-835-6100. Refer to the topic
ÒUsing the automated fax systemÓ in Chapter 10, ÒTroubleshooting,Ó for
instructions on using HAL.
Also available from Tektronix is Phaser Print, a driver that allows
workstation users to control Tektronix color printer features. Phaser Print
also provides Sun SRF, xwd, and SGI RGB raster Þle printing to Tektronix
color PostScript printers. For more information about Phaser Print, contact
your reseller or local Tektronix ofÞce. Or, in the U.S. and Canada, call
1-800-835-6100 and ask for the sales department.
The utility Þles perform such tasks as color corrections, changing the printer
name, and printing a conÞguration page. The utility Þles on the Printer
Utilities diskette for PC/DOS are written in the PostScript Level 2
programming language, and in a few cases you may have to edit the Þles to
change the default parameters.
Printing Reference
4-1