Setting The System Id (Your Number And Name) - Xerox WorkCentre 490cx Online User's Manual

BOOK TOC
CHAPTER TOC
SEARCH
4. Press the Start button when the date and time settings displayed are
correct. The display indicates the date and time you have set, then
returns to Standby mode.
Note: If an invalid number is entered, the machine beeps and does not
proceed to the next step. If this happens, enter the correct number.

Setting the System ID (Your Number and Name)

In some countries you are required by law to indicate your fax number on any
fax you send. The System ID, containing your telephone number and name,
will be printed at the top of each page sent from your machine.
1. Press the Menu button, then press the 0 + 2 buttons on the keypad.
Then press the Start
display. A flashing cursor in the display prompts you to enter the
telephone number.
Note: If there is a number previously registered, it appears in the display.
2. Enter the telephone number (up to 20 digits) to which your machine is
connected. You can enter a space by pressing the Right
times.
If an incorrect number is entered, press the Left
to move the cursor under the incorrect digit, then enter the correct
number.
3. Press the Start button when the correct number is displayed. The
display prompts you to enter your ID name.
PREVIOUS PAGE
SYSTEM SETUP
button. SYSTEM NUMBER appears in the LCD
button two
or Right button
NEXT PAGE
49