Adding Documents To The Job To Be Polled - Xerox WorkCentre 490cx Online User's Manual

BOOK TOC
CHAPTER TOC
SEARCH

Adding Documents To the Job to be Polled

If you want to add documents to the original documents waiting in memory to
be polled, follow the procedure below.
1. Place the additional documents face down into the Automatic Document
Feeder.
2. Press the Menu button, then press the 1 + 0 buttons on the keypad.
Then press the Start
1.ADD or 2.CANCEL.
3. Press 1.
The setup POLL CODE information for the job stored into memory is
displayed.
4. Press the Start button.
The machine scans the new documents into memory and returns to
Standby mode.
Canceling a Job Already in Memory Which is Waiting to be
Polled
If you want to cancel a job already in memory waiting to be polled, follow the
procedure below.
1. Press the Menu button.
2. Press the 1 + 0 buttons on the keypad. Then press the Start
The LCD display prompts you to select 1.ADD or 2.CANCEL.
PREVIOUS PAGE
POLLING
button. The LCD display prompts you to select
button.
108
NEXT PAGE