Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
Changing Copy Setup
When making copies, you may change the Contrast or Copy Size. This must
be done after the document is inserted into the Automatic Document Feeder.
After making a copy, the machine will return to the original default settings.
Therefore, you must repeat the Copy Setup changes for the next copy job. To
change copy Contrast:
1. With the document inserted in the Automatic Document Feeder, press the
Lighten/Darken
button. The current Contrast setting is displayed on
the LCD display.
2. To change the Contrast, continue to press the Lighten/Darken
The setting will change each time you press the button. You may choose
Normal, Darken, Lighten or Photo.
Note: After releasing the button, the machine will switch to the mode
currently displayed. It is not necessary to press any other buttons for this
action.
3. When the desired Contrast setting has been selected, return to the
procedure that was being performed.
PREVIOUS PAGE
CHANGING COPY SETUP
CONTRAST
[
NORMAL
]
button.
66
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
