Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
15. Press the Up
or Down
appears in the lower line of the display.
16. Press the Start
button to confirm your choice.
The Cartridge Carrier Assembly moves back to the docking position.
17. A Cartridge Alignment Test print is printed out. This will ensure that your
WorkCentre 490cx generates the best possible prints. Refer to
Alignment.
Caution: Do not power off the machine until the Cartridge Carrier Assembly
has moved back into the docking position. If no menu choices are made, the
Carrier Assembly will automatically return to the docking position after about
one minute.
Loading Paper
For best results, use high quality Xerographic copy paper or inkjet paper.
Using the Automatic Paper Feeder
You can stack paper, envelopes, card stocks, labels, or transparencies in the
Automatic Paper Feeder to feed automatically. The Automatic Paper Feeder
can hold a maximum of 100 sheets of 20 lb plain paper, or 10 envelopes or
other print media. Depending upon media thickness, maximum capacity may
be reduced.
Note: If you experience problems feeding paper, place the media into the
Manual Paper Feeder one sheet at a time.
PREVIOUS PAGE
SET UP YOUR MACHINE
buttons until NEW BLACK CARTRIDGE
Arrange
23
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
