Setting The System Id(Your Number And Name) - Xerox WorkCentre Pro 385 User Manual

Setting the System ID (Your Number and Name)
In some countries you are required by law to indicate your fax number on
any fax you send. The System ID, including your telephone number and
name, will be printed at the top of each page sent from your machine.
1
Press the Menu button, then press the System ID button on the One-
Touch keypad. The display prompts you to enter the telephone number.
If there is a number previously registered, the number appears.
2
Enter the telephone number (up to 20 digits) to which your machine is
connected. You can enter spaces with the Pause button or a dash with
the # button.
If an incorrect number is entered, press the Right or Left button to
move the cursor under the incorrect digit, then enter the correct number
or press the Delete button to delete the number.
3
Press Enter when the correct number is displayed. The display prompts
you to enter your ID name.
4
Enter your ID name. This can be any name up to 20 characters in
length. You can enter alphanumeric characters using the Number
keypad. Special symbols such as + and - can be included by pressing 0
repeatedly. If you want to enter the same letter or number in succession
(for example, SS, AA, 777), enter one digit, then move the cursor by
pressing the Right button, and enter the next digit.
Use the Right button to insert a space in the name, Pressing the Right
button two times moves the cursor two positions to the right, creating a
space.
For additional details on how to use the Number keypad to enter
alphanumeric characters, see Entering Alphanumeric Characters on
page 3-24.
1-42 Getting Started