Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
PRINT QUALITY PROBLEMS
Print Quality Problems
Symptom
Light or blurred characters.
Solid black areas on
transparencies contain white
streaks.
Smudged or dark
characters.
PREVIOUS PAGE
Cause and Solution
• You may be using Draft quality or Normal quality
mode. Try using High 1200 dpi print quality mode.
• The print cartridge may be running out of ink.
Replace the print cartridge. The Status monitor
shows the amount of ink left in the cartridge.
• Make sure you are using the correct type of paper.
Try another type of paper.
• You may be printing on the wrong side of the paper.
• The print head may need cleaning. See
Cartridge Nozzle
Test.
• Try changing the fill pattern in your application
software.
• The print head may need cleaning. See
Cartridge Nozzle
Test.
• Make sure you are using the correct type of paper.
Try another type of paper.
• Make sure the paper is straight and unwrinkled.
• Let ink dry before handling the paper. You can use
'Dry Time Delay' check box in the print setting. See
Main
Tab.
• Change the Print Quality setting to Normal quality
mode. See
Main
Tab.
• The print head may need cleaning. See
Cartridge Nozzle
Test.
Print
Print
Print
192
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
