Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
Automatic Reports
Some reports will print out automatically depending on machine status. The
user is not required to select these reports.
Note: Any report or list which is configured to print automatically will not
print if your machine runs out of ink or paper, has a paper jam, or is printing a
file sent from a PC.
•
Multi-Communication Report
This report is printed automatically after sending to or receiving from
more than one location, and provides detailed information about the
operation.
•
Power Failure Report
This report is printed out automatically if the memory has not been
backed up when power is restored following a power failure. This report
shows any data (if any) that was erased due to the power failure.
User Options (System Data)
Your machine has various user-selectable features. These options are
preset at the factory, but you may need to change them. To find out how the
options are currently set, print the System List. For more information on
printing the list, see
To Print
PREVIOUS PAGE
AUTOMATIC REPORTS
Reports/Lists.
53
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
