Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
To Change Copy Size:
1. With the document inserted in the Automatic Document Feeder, observe
the LCD display. The current copy size setting is displayed on the LCD
display.
2. To change the Copy Size, continue to press the Reduce/Enlarge
button. The number in the right corner of the bottom line shows the current
image percentage. To reduce or enlarge the image size, enter the percent
value (25 to 200) using the keypad.
Note: After releasing the button, the machine will switch to the mode
currently displayed. It is not necessary to press any other buttons to
complete this action.
3. Press the Down
procedure that was being performed.
PREVIOUS PAGE
CHANGING COPY SETUP
DOCUMENT READY
AUG--20--2000 100%
REDUCE/ENLARGE
[25-200%] <100>
button to confirm your setting. Return to the
67
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
