Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
Arrange Alignment
The Arrange Alignment menu settings provide an easy way to check and
adjust Ink Cartridge print head alignment. To run the Arrange Alignment:
1. Press the Menu
Then press the Start
2. Press the Down
display.
3. Press the Start
button. PRINTING... appears on the LCD display.
The WorkCentre 490cx prints out a Cartridge Alignment pattern sheet
consisting of a series of six test patterns. The patterns are designated
A,B,C, D, E and F. Each pattern is made up of a series of lines which are
individually numbered. By selecting the straightest line from each
pattern, you can optimize the print head alignment.
After printing out the Cartridge Alignment sheet, the Cartridge
Maintenance set up menu appears on the LCD display.
The letter A, located on the right end of the lower line in the display,
corresponds to alignment test pattern A. The range of numbers
bracketed in the center of the display line indicates the range of valid
pattern selection choices. The flashing number on the left side of the
display indicates the line from print pattern A that is currently selected as
optimal.
PREVIOUS PAGE
SYSTEM SETUP
button, then press the 1 + 2 buttons on the keypad.
button. The display indicates SELF TEST ?.
button. ARRANGE ALIGNMENT ? appears in the
CARTRIDGE MAINT.
<15>
[0-30]
A
44
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
