Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
TELEPHONE CONNECTIVITY GUIDELINES
To use the WorkCentre connected to a telephone (with answering
machine) and a PC without a fax/data modem:
From the USB
connector
From the Printer
connector
In this configuration, the answering machine should answer incoming calls.
The WorkCentre will monitor the call and take control of the telephone line if
a fax call is detected.
Plug one end of a telephone cable into the WorkCentre's Line connector, and
the other end into the wall outlet. Plug the answering machine Line into the
EXT connector, and plug the extension telephone into the answering
machine. The PC printer port is connected to the WorkCentre's printer port
with the Xerox supplied printer cable or using a USB connection.
Set the WorkCentre's Receive mode to ANS/FAX. At the control panel,
press the Receive Mode
PREVIOUS PAGE
From the EXT
connector
From the LINE
connector
button (until ANS/FAX displays).
Answering
Machine
Wall outlet
NEXT PAGE
248
Advertisement
Table of Contents
Troubleshooting
