Check The Information Related To The Internal Status Of The Inverter; Monitor The Accumulated Run Time/Accumulated Power-On Time Of The Inverter - Hitachi WJ Series User Manual

Chapter 10

10.3 Check the Information Related to the Internal Status of the Inverter

10.3.1

Monitor the Accumulated Run Time/Accumulated Power-On Time of the Inverter

 How to check the total running time of the inverter after shipment from the factory?
Q
 How to check the total power-on time of the inverter after shipment from the factory?
Accumulated RUN time monitor [d016]
A
 Displays the accumulated time output to the motor when the inverter is in operation.
 This data is stored in the internal memory of the inverter when the power is shut off.
Code
Accumulated RUN time
[d016]
monitor
Accumulated power-on time monitor [d017]
A
 Displays the accumulated energization time of the inverter.
 This data is stored in the internal memory of the inverter when the power is shut off.
Code
Accumulated power-on
[d017]
time monitor
 [d016] and [d017] cannot be cleared even if parameters are initialized.
!
Item
Displays the total operation time of the inverter
after shipment from the factory. This data is stored
in the internal memory when the power is shut off.
Item
Displays the total power-on time of the inverter
after shipment from the factory. This data is stored
in the internal memory when the power is shut off.
10-3-1
Monitor Functions
Description
Description
Data
0 to 999000 (hr)
Data
0 to 999000 (hr)